The
creep of a low carbon steel in the form of helical coils was investigated in the temperature range 698–923 K (0.39 to 0.51 Tm), for grain size 6–23 ?m […] —
ادامه متن1. Introduction to
creep plasticity. Creep of materials is classically associated with time-dependent plasticity under a fixed stress at an elevated temperature […] —
ادامه متنطبقه بندی: مهندسی عمران | معرفی بتن کوبیده غلطکی تاریخچه استفاده از بتن غلطکی | موارد استفاده از Rcc | جایگاه Rcc در سد سازی | انتخاب ساختگاه | توجیه پذیری اقتصادی اجرای سدهای Rcc | -مقایسه اقتصادی بین سدهای Rcc و سایر سدها | -مقایسه اقتصادی سدهایrccبا سدهای خاکی | -مقایسه اقتصادی سدهای Rcc با سدهای وزنی بتن معمولی | محدودیت سدهای Rcc | دسته بندی سدهای بتن غلطکی | خصوصیات بتن Rcc | مقاومت فشاری | مقاومت کششی | مقاومت برشی | مدول الاستیسیته | ضریب پواسن | تغییر حجم |
خزش | تغییرات حرارتی | راههای به حداقل رساندن تنش های حرارتی | کارایی Rcc | دوام | دانسیته | نفوذپذیری و تراوش در سدهای Rcc | مصا […] —
ادامه متنOrigin of cyclic
creep Generally speaking, annealed metal will not produce substantial
creep under completely reversed stress cycles unless the stress is very high. […] —
ادامه متنNumerous authors, within the framework of the physical and metallurgical points of view, have proposed various types of
creep constitutive equations for metals. […] —
ادامه متنThe online version of Fundamentals of Creep in Metals and Alloys by Michael E. Kassner on ScienceDirect.com, the world"s leading platform for high quality peer […] —
ادامه متنThe
creep of a low carbon steel in the form of helical coils was investigated in the temperature range 698–923 K (0.39 to 0.51 Tm), for grain size 6–23 ?m […] —
ادامه متنAnisotropic Creep and Fracture Behaviour of a 9CrMoNbV Weld Metal at 650°C. (1985). Creep of metals and alloys, Technical report, Institute of Metals, London. […] —
ادامه متنIt is proposed that curves of metal creep be approximated by the time-relative linear law with the initial creep strain discontinuity; as a result, the solution of […] —
ادامه متنPlasticity and Creep of Metals. Authors: Andrew Rusinko, Konstantin Rusinko […] —
ادامه متنInfluence of Oxide Growth and Metal Creep on Strain Development in the Steam-Side Oxide in Boiler Tubes […] —
ادامه متنچکیده | این مقاله به شرح مدلی عددی برای محاسبه ی تنش، پتانسیل الکتریکی و تاریخچه ی جابجایی در یک کره ی پیزو الکتریکی توخالی که تحت فشار داخلی و میدان توزیع دما قرار دارد، می پردازد. مدل مذکور، بر مبنای روش مندلسون، تغییرات تنش، پتانسیل الکتریکی و جابجایی را با گذشت زمان در راستای ضخامت تخمین می زند. مدل ساختاری
خزش برای کرنش موثر نیز بر پایه ی قانون بیلی-نورتون می باشد. از آنجاییکه کرنش ها، وابسته به زمان، دما و تنش می باشند، بنابراین فرم حل بسته ای برای معادلات ساختاری نمی توان ارائه نمود. از این رو یک روش شبه تحلیلی در ارتباط با روش تقریبات متوالی برای این تجزیه و تحلیل پیشنهاد شده است. نتای […] —
ادامه متنThe
creep behavior of niobium, tantalum, and molybdenum base alloys tested under uniaxial and biaxial loading was investigated. The test temperature range spans […] —
ادامه متندسته: مقالات ترجمه شده Isi | حجم فایل: 625 کیلوبایت | تعداد صفحه: 15 | مروری مختصر بر تحلیل خزش، ثبات ویسکو الاستیک در پوسته های استوانه ای. | چکیده: | این مقاله به تجزیه و تحلیل خزش، ثبات ویسکو الاستیک پوسته استوانه ای تحت فشار محوری پرداخته است. خواص مکانیکی مواد توسط معادلات ساختاری براساس نظریه ویسکوالاستیک خطی از نظر پیچیدگی اپراتورهای جدایی ناپذیر پرداخته است. راه حل تحلیلی تقریبی برای این مشکل توسط استفاده از روش اصلاح شبه الاستیک ارائه شده است در نتیجه شرایط بی ثباتی برای پوسته فرموله شده است نشان داده شده است. که برای مواد ویسکوالاستیک با
خزش محدود محدودیت بارگذاری در ساختار پایدار وج […] —
ادامه متنCreep data for mild steel at low temperatures (360–400°C) have been analysed and it has been found that the
creep behaviour is similar to that at higher temp […] —
ادامه متنPlasticity and Creep of Metals. Authors: Andrew Rusinko, Konstantin Rusinko […] —
ادامه متنASME Grade 91 steel base metal and a similar weld were tested under
creep at 500 °C for rupture time up to 18,000 h. Creep failure of cross-weld spec […] —
ادامه متنInfluence of Oxide Growth and Metal Creep on Strain Development in the Steam-Side Oxide in Boiler Tubes […] —
ادامه متنThe
creep properties of a cast of duplex stainless steel were characterized at temperatures 550–800°C under different loading conditions. For fully aged spec […] —
ادامه متنThe
creep behavior of two austeitic stainless-steel weld metals was investigated. Two AISI 316L stainless-steel base plates were welded together using the submerged […] —
ادامه متن